Telecom Cooling
TELECOOL
TELECOOL cabinet cooling unit is cooling with compressor or heat pipe, and it will remove the heat inside the cabinet to outside. It can also keep the dust and heat outside the cabinet, avoiding problems from using fan. The inside cabinet can be maintained at an ideal temperature for electrical components which effectively guarantees the stability of the electronic equipment and improves the reliability of the whole system. The products can be widely used for outdoor communication cabinets, battery cabinets, electric cabinets, industry control cabinets etc. The default power source of TELECOOL is 48V DC, using the cabinet battery directly. The unit doesn’t bear any additional failure risk and energy consumption caused by inverter, and continues working by using the electric energy from accumulator after the interruption of main supply, protecting the cabinet from shutting down due to the high temperature working environment. We provide multiple power sources for TELECOOL, the customer could choose suitable product according to their demands.
Cooling Capacity：500W-3000W APPLICATION Battery CabinetOutdoor Cabinet Telecommunication Base Station TLC-HP Heat Exchanger. Brief Introduction Heat exchanger is a device that utilizes the natural cool resource to exchange heat between hot inside and cool outside of cabinet with limited power consumption. When there is large temperature difference. The device will effectively exchange heat between hot inside and liquid refrigerant, between cool outside and gaseous refrigerant, bringing out heat through heat pipe, which make the cabinet to be an enclosed system with temperature control, and equipment inside can work normally. Product Features Unique Z shaped heat pipe structure, high heat exchange efficiency Without compressor, compact structure and light in weight, easy for installation and maintenance Parallel flow heat exchanger featured as short aisle, large fin space, making dust easy to pass. No need to install filter and maintain regularly.Low startup temperature difference, making the most of natural cooling source.Word-famous key components makes the system more stable.Enclosed air circuit cooling system design, effectively avoid contamination from outside RS485 Communication port, monitor control.48V DC power supply standard, AC, AC&DC power supply are available on request TLC-AC Air Conditioner Brief Introduction Comparing to the ones of traditional outdoor mobile base station without a temperature management device, the new battery of outdoor base station with a cooling unit has a service life prolonged 3 to 4 times. The newtype compression multi-functional cooling unit, which applies DC power supply, is able to ensure that the temperature of battery cabinet will not exceed 25℃ when the environmental temperature is as high as 55℃， and that its energy consumption only takes 1/4 of that of the traditional cabinet cooling unit. By advantage of the adaptation of 48V DC direct-driving compressor, the cooling unit doesn't need to bear any traditional failure risk and energy consumption caused by inverter, and continues working by using the electric energy from accumulator after the interruption of mains supply. Owing to the excellent energy efficiency ratio(EER), the working cooling unit only consumes a little of back-up power. For the regions where the mains supply is in a better and stable condition, we also provide a type of multi-functional cooling unit which applies the bi-model (AC & DC) power supply technologies. The compressor is AC-powered. When the mains supply is interrupted, the DC-powered fan and electric air valve will operate in time for indoor/ outdoor air exchange, so as to prevent the cabinet from excessive high temperature as a result of the interruption of mains supply. The electric air valve also has the function of exhausting hydrogen and acid gases produced by the working battery from the cabinet in daily use. The installation of multi-functional cooling unit not only can extend the service life of battery of outdoor station, but also prevent the station from paralysis as a result of battery failure. The multi-functional cooling unit not only can be used for the cooling of battery chamber, and also applies to the heat management of small outdoor cabinet due to its compact and light structure. Product Features Low noise mode, can be activated on site, meet special requirements Word-famous key components makes the system more stable Enclosed air circuit cooling system design, effectively avoid contamination from outside RS485 Communication port, monitor control 48V DC power supply standard, AC, AC&DC power supply are available on request Tested before leaving factory, performance and quality is assured TLC-HY Integrated Air Conditioning Heat Exchanger Unit Brief Introduction An ideal mini-shelter heat management equipment shall have low energy consumption as the heat exchanger but with the same cooling capacity as the cabinet airconditioning. Furthermore, when the cooling system malfunctions, the heat exchanger can operate automatically, so as to prevent the entire system of outdoor base station from "out of service" due to loss of temperature control. The innovative design integrates the compression cooling system and the independent flow heat exchanger, creating the "Integrated Air-conditioning Heat Exchanger", a brandnew heat management device which doesn't belong to cabinet air-conditioning and is different from ordinary heat exchanger. The outdoor base station works under changing temperatures. In general, the daily maximum temperature is in the time period from 10:00AM to 3:00PM. During such period, the compression cooling unit is used for cooling supply, while the heat exchanger is used to control the temperature during the rest periods. Therefore, under the same condition, the energy consumption of integrated air-conditioning heat exchanger is 70% lower than that of traditional cabinet air-conditioning. Product Features Integrated with independent refrigerating system and heat exchanger Refrigerating system can work simultaneously and back up for each other, more stableMake the most of natural cooling source with intelligent step cooling Strongly recommend for energy saving projectsWord-famous key components makes the system more stable Enclosed air circuit cooling system design, effectively avoid contamination from outsideRS485 Communication port, monitor control48V DC power supply standard, AC, AC&DC power supply are available on request Tested before leaving factory, performance and quality is assured
